Type CTL(in series) centrifugal-extractive machine
Mix mass transfer process
The two phrases will be separated owing to the field of the centrifugal force.The liquid for bigger specific gravity gets away from the drum center and close to the drum wall when it moves up,while another liquid for smaller specific gravity gets away from the drum wall and close to the drum center.In the end,the two liquids come into their own collecting-rooms respectively,and get out of the machine through a lead tube.The separation of the two mixtures is complete.
Separation process

Driven by the plate,the two liquid mixtures in the lower rotating-drum will rotate synchronously as the lower rotating-drum rotates,then get into the upper rotating-drum from the annular fender through the centrifugal force of the upper rotating-drum.The two mixtures in the drum continue to rotate,driven by the plate.
The main technological
  CTL165-N CTL250-N CTL325-N CTL400-N CTL450-N
Drum Diameter mm 165 250 325 400 450
Length of drum mm 350 625 840 950 1130
Ratio of length and diameter L/D 2.12 2.5 2.58 2.5 2.51
Drum Rev. r/min 3000 2500 2050 1900 1700
mix flux m3/h ≤2.7 ≤6 ≤11.8 ≤22 ≤30
Efficiency of extraction machine % ≥95 ≥96 ≥97 ≥97 ≥97
Copyright(C)2005-2006, Zhangjiagang Municipal Light Industry Equipment Plant
All Rights Reserved.Supported by ChemIndex ChemNet ChinaChem
ضاثر